Buell 2002 P3 Service Manual page 78

HOME
ITEM
Rear brake caliper pad hanger pin
Rear brake fastener
Rear brake reservoir mounting screw
Rear drive sprocket bolts
Rear fender mounting screws
Rear isolator-to engine crankcase
Rear master cylinder mounting screws
Rear muffler strap bolts
Rear shock top and bottom bolt
Steering head cap nut pinch screw
Steering head cap nut
Steering head lower triple tree clamp
screws
Steering head upper triple tree clamp
screws (at sliders)
Swingarm bolt
Swingarm pinch bolt
Switchgear housing screws, right side
Valve stem nut
Windscreen screws
TORQUE
11-15 ft-lbs 15-20 Nm
6-8 ft-lbs 8-11 Nm
12-15 in-lbs 1.4-1.7 Nm
18-22 +40° ft-lbs 24-30 Nm +40°
30-36 in-lbs 3-4 Nm
32-34 ft-lbs 46-50 Nm
4-6 ft-lbs 5-8 Nm
22-25 ft lbs 30-34 Nm
35-40 ft-lbs 47-54 Nm
7-10 ft-lbs 10-14 Nm
28-32 ft-lbs 38-43 Nm
22-29 ft-lbs 30-39 Nm
13-16 ft-lbs 18-22 Nm
24-26 ft-lbs 33-35 Nm
17-19 ft-lbs 23-26 Nm
12-17 in-lbs 1-2 Nm
42-44 in-lbs 4.7-5.0 Nm
9-11 in-lbs 1 Nm
NOTES
Metric, Page 2-31
Page 2-54
Page 2-28
Apply several drops of LOCTITE®
thread locker 272 (red) to last few
threads. Page 2-11
Page 2-55
Apply several drops of LOCTITE®
thread locker 243 (blue) to last few
threads, Page 2-65
Apply several drops of LOCTITE®
thread locker 243 (blue) to last few
threads, metric, Page 2-28
Page 2-52
Page 2-33
Page 2-49
Page 2-49
Page 2-49
LOCTITE ANTI-SEIZE, Page 2-47
Apply anti-seize to bolt and install, Page
2-50
Apply several drops of LOCTITE®
thread locker 243 (blue) to last few
threads, Page 2-50
Metric, Page 2-34
Page 2-17
Page 2-59
2002 Buell P3: Chassis 2-3