Hcit Media Feeder Removal - Lexmark M5150 Service Manual

5
Remove the screw (A) securing the sensor.
6
Release the cable from its cable holders, then remove the sensor.

HCIT media feeder removal

1
Remove the HCIT. See
2
Remove the HCIT rear cover. See
3
Remove the HCIT left cover. See
4
Remove the HCIT top cover assembly. See
5
Remove the sensor (HCIT pick roller position). See
"HCIT removal" on page 531.
"HCIT rear cover removal" on page
"HCIT left cover removal" on page
"HCIT top cover assembly removal" on page
Repair information
536.
537.
"Sensor (HCIT pick roller position) removal" on page
551
4063
542.
548.