Main Drive Motor Removal - Lexmark M5150 Service Manual

4
Disconnect the cable (C) from the controller board, and remove the main cooling fan.

Main drive motor removal

Installation warning: When replacing the main drive motor, make sure that the control panel door is in the closed
position or the main drive motor will not align properly, and damage will occur.
1
Remove the imaging unit from the machine.
2
Remove the right cover. See
3
Remove the rear lower cover. See
4
Remove the LVPS. See
5
Remove the left cover. See
6
Remove the PCBA housing. See
7
Remove the harnesses from the clamp (A).
"Right cover removal" on page
"Rear lower cover removal" on page
"LVPS removal" on page
"Left cover removal" on page
"PCBA housing removal" on page
Repair information
505.
454.
511.
489.
500.
497
4063