Insert Tray [X]; Install Bin [X]; Install Tray [X]; Insufficient Memory For Flash Memory Defragment Operation [37] - Lexmark M5150 Service Manual

Insert Tray [x]

Try one or more of the following:
•
Insert the specified tray into the printer.
•
Cancel the print job.
• Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.

Install bin [x]

Try one or more of the following:
•
Install the specified bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified bin.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
•
Reset active bin

Install Tray [x]

Try one or more of the following:
• Install the specified tray:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
• Cancel the print job.
•
Reset the active bin.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:
•
From the printer control panel, select Continue to stop the defragmentation and continue printing. For
non‑touch‑screen printer models, press
•
Delete fonts, macros, and other data from the printer memory.
•
Install additional printer memory.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.
to confirm.
Diagnostic information
218
4063