4
Pull the shaft off the output bin, and remove.
HCOE bin removal
1
Remove the HCOE left cover. See
2
Remove the HCOE right cover. See
3
Remove the HCOE tray pinion. See
4
Remove the HCOE tray shaft. See
5
Disconnect the cable J10 from the controller board.
"HCOE left cover removal" on page
"HCOE right cover removal" on page
"HCOE tray pinion removal" on page
"HCOE tray shaft removal" on page
Repair information
615
589.
588.
598.
614.
4063