Stapler Drive Gear Assembly Removal - Lexmark M5150 Service Manual

4
Remove the two screws (C) securing the diverter plunger and cam.
5
Remove the cam first, and then remove the plunger.
Installation note: Make sure that the pin (D) is inserted into the center hole on the diverter cam. The C-shaped
slot on the cam must be engaged with the locating pin on the plunger.

Stapler drive gear assembly removal

1
Remove the stapler left cover. See
2
Remove the stapler diverter plunger assembly. See
D
"Stapler left cover removal" on page
"Stapler diverter plunger assembly removal" on page
Repair information
668
C
630.
4063
667.