Restoring The Printer Configuration After Replacing The Controller Board - Lexmark M5150 Service Manual

Restoring the printer configuration after replacing the controller board

Restore the printer to the correct configuration to complete the controller board replacement service. Use the Service
Restore Tool to download the software bundle that contains the factory settings and Embedded Solutions for the
specific printer.
Note: If the printer contains solutions or software licenses obtained from Lexmark Virtual Solutions Center (VSC), the
latest version of the firmware, applications, and licenses deployed through the VSC are included in the software
bundle. This may result in the printer firmware being at a different level from what was used prior to replacing the
controller board.
Using the Service Restore Tool
1
Go to https://cdp.lexmark.com/service-restore-tool/
2
Log in using your Lexmark or partner login.
Note: If your login fails, then contact your next level of support.
3
Enter the printer serial number, and then submit the information.
Note: Verify that the serial number that appears on the verification screen is correct.
to access the tool.
Repair information
357
4063