12
Remove the mylar plate (D) covering the sensor latches. Release the sensor latches.
13
From the other side of the frame, disconnect the sensor cable, and then remove the sensor from the frame.
Sensor (stapler diverter plunger HP) removal
1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler diverter plunger assembly. See
4
Remove the stapler drive gear assembly. See
5
Remove the stapler feed roll. See
6
Remove the stapler chute assembly. See
"Stapler left cover removal" on page
"Stapler right cover removal" on page
"Stapler diverter plunger assembly removal" on page
"Stapler drive gear assembly removal" on page
"Stapler feed roll removal" on page
"Stapler chute assembly removal" on page
Repair information
686
630.
624.
668.
672.
674.
4063
667.