4
Remove the two screws (C) securing the diverter plunger and cam.
5
Remove the cam first, and then remove the plunger.
Installation note: Make sure that the pin (D) is inserted into the center hole on the diverter cam. The C-shaped
slot on the cam must be engaged with the locating pin on the plunger.
Stapler drive gear assembly removal
1
Remove the finisher left cover. See
2
Remove the stapler diverter plunger assembly. See
D
"Staple, hole punch left cover removal" on page
"Stapler diverter plunger assembly removal" on page
Repair information
755
C
739.
4063
754.