Sensor (Input) Miscellaneous Jam 2 Service Check; Sensor (Input) Miscellaneous Jam 3 Service Check - Lexmark M5150 Service Manual

Action
Step 2
Check the above sensor for proper connection.
Is the above sensor connected properly?
Step 3
Perform a print test using the appropriate input tray.
Does the error continue?

Sensor (input) miscellaneous jam 2 service check

Action
Step 1
Check the sensor (input) for proper operation.
a
Enter the diagnostic mode.
b
Select Base sensor test.
c
Observe the line item control panel door interlock.
Does the display on the control panel change every time the sensing area
of the above sensor is interrupted or blocked?
Step 2
Check the above sensor for proper connection.
Is the above sensor connected properly?
Step 3
Reset the machine.
Does the error continue?

Sensor (input) miscellaneous jam 3 service check

Action
Step 1
Check the media size setup and tray guides for all media trays.
Does the media size in use match the size set for all media trays?
Step 2
Check the media condition in all media trays.
Is any of the media in any of the media trays crumpled or damaged?
Yes
Replace the sensor
(pass through). See
"Sensor (drawer pass
through) removal " on
page
Replace the input
option.
Yes
Go to
Replace the sensor
(control panel door
interlock).
Go to step 3.
Replace the controller
board. See
board removal" on
page
Yes
Go to step 2.
Replace the damaged
media.
Diagnostic information
77
No
Reseat the connection.
527.
Problem solved.
No
step 3. Go to step 2.
Replace the
connection.
Go to step 3.
Problem solved.
"Controller
492.
No
Replace the media, or
change the media size
setup.
Go to step 3.
4063