Pick Roller Assembly Removal - Lexmark M5150 Service Manual

b
Swing the actuator, and then press the free end to lock it in place.

Pick roller assembly removal

1
Remove the media tray. See
2
Lower the front duplex flap to gain access to the pick roller assembly.
Note: When removing the pick roller assembly, avoid all contact with the roller surfaces, or paper jams might
occur.
3
Squeeze both sides of the pick roller latch, and move the pick roller assembly to the right to remove it.
Note: When replacing the pick rollers, do not touch the roller surfaces, or paper jams might occur.
"Media tray removal" on page
Repair information
482
479.
4063