Inspection And Factory Settings - FujiFilm FINEPIX S9100 Service Manual

5. Inspection
5-3.

Inspection and Factory Settings

Sequemnce Item
1 External visual
check
2 Power switch Auto mode
check LCD-ON
EVF-ON
3 Shock noise check Auto mode
in Auto mode LCD-ON
5-2
Mode Preparations for adjustment
(measurement points, subject, other)
Camera observation
(1) Load batteries into the
camera.
(2) Insert a card and close
the card cover.
(3) Select the Mode dial
setting.
(4) Turn the camera on in
Photography mode.
(5) If a message prompting
the user to set the date
appears, press the button
specified on the right.
(6) Check the display status
(7) Press the <EVF/LCD>
button.
(8) Turn the dioptric
adjustment dial up and
down.
(9) Check for blemishes in
the CCD live image.
(1) Apply a shock to the
camera.
FinePix S9100/S9600 Service Manual
Method of adjustment
(VRs, waveforms, required values)
(1) Check for damage to the
outer casing
(2) Check for problems with
the clicking or sliding
movement of switches
(3) Check for dust or fogging
in the EVF
(4) Check for dust or fogging
in the LCD
(1) 4.6 V to 6.8 V (sample)
(2) Card for recording
checking
(3) Mode: AUTO
(4) Check that the camera
beeps.
(5) <DISP/BACK>
(6) Check that the live image
and text is displayed.
(7) Check that the live image
is displayed.
(8) Check that the blurring of
the EVF screen varies.
Check that the dial turns
smoothly between the
upper and lower limits.
(9) Monitor a very bright
subject and check that
the live image does not
dim or darken.
(1) Check for problems on
the LCD monitor.
Check that the camera
recovers from
synchronicity disruption
(Note) Do not apply
shocks directly to the lens
or card cover.
Measuring Measurement points
equipment and jigs (VRs, positions)