FujiFilm FINEPIX S9100 Service Manual page 122

4. Adjustments
<Step 3>
Firmware download is completed
(1) Remove the DC Jack cable from the camera.
(2) Turn off power lever switch.
(3) Reconnect DC Jack cable.
(4) Switch camera power ON while pressing the shutter button.
(5) Press the [Enter] key after green LED lights on.
The system returns to the Jig Mode Setup screen
when press the [Enter] key.
4-54
FinePix S9100/S9600 Service Manual
<Fig. 4-19-2>
Revised: 30, Jan. 2007