F2] : Mode Dial Adjustment - FujiFilm FINEPIX S9100 Service Manual

FinePix S9100/S9600 Service Manual

4-17. [F2] : Mode Dial Adjustment

<Setup for Mode Dial Adjustment>
(1) When adjusting the Mode Dial, supply power (5.0V) to the camera from the [Power Cable Jig] before setting the jig mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
FinePix S9100/S9600
USB
DC JACK
<Step 1>
Select [F2] Mode Dial Adjustment on the [Adjustment Items Select] screen.
—> The [Mode Dial Adjustment Preparation] screen appears.
PC for adjustments and checks
Digital voltmeter
USB cable
Power supply cable jig
4. Adjustments
Regurated
Power supply
4-49