FujiFilm FINEPIX S9100 Service Manual page 29

FinePix S9100/S9600 Service Manual
[Notes on assembling the WIRE HARNESS for the
FLASH CONST]
(1) To ensure that the harness is not pinched when the
FLASH TOP opens and closes, arrange the wires so
that they form a 4-strand twisted cable.
(2) Twist the harness 2 turns to the left from the correct
position and fasten it to the connector.
(3) Ensure that the harness does not protrude below the
FLASH CONST.
2. Disassembly
2-15