FujiFilm FINEPIX S9100 Service Manual page 88

4. Adjustments
When [Adjustment OK!] appears on the screen, press the [Enter] key on the PC and make adjustment preparations in
accordance with the instructions from the adjustment software.
AF-Sensor horizontal Adjustment
Turn the AF-Sensor horizontal adjustment screw.
Press the [Enter] of PC when the adjustment is completed.
OK!
Press [0]key of PC when you cannot complete the adjustment.
--> The [AF-Sensor right and left difference adjustment (Fig. 4-9-9)] appears.
<Step 8>
Prepare the AF sensor right and left difference adjustment according to the instruction of the adjustment software.
AF-70cm chart setup distance : 700mm+/-5mm from front Zoom-Ring edge.
Chart surface reflective luminance : 7.0Ev to 9.0Ev.
Press the Enter key.
AF-Sensor right and left difference adjustment
(1) Change the S9000/S9500 AF-70cm Chart at a
distance of 700+-5mm from the Zoom-Ring edge.
(2) Don't set the conversion lens yet.
(3) Set the zoom position to the side of the TELE edge.
When preparations (1) - (3) are complete,
press the [Enter] key.
Zoom Ring edge
| <--------------------------------------Center-------------------------------------->
CAMERA < Setup for AF-Sensor R-L Adjustment >
--> The [AF-Sensor Linearity adjustment Screen (Fig. 4-9-10)] appears.
4-20
THRE1 = 139
MAX = 195
MIN = 111
700+-5mm
FinePix S9100/S9600 Service Manual
MAX = 195
MIN = 145
AF-70cm Chart
<Fig. 4-9-8>
<Fig. 4-9-9>