Removing The Hinge Const - FujiFilm FINEPIX S9100 Service Manual

2. Disassembly
2-6.

Removing the HINGE CONST

(1) Remove the 2 screws (M1.7 x 4.0).
(2) Remove the 5 screws (M1.7 x 2.0).
(3) Run the LCD FPC to the inside.
(4) Pull the COVER FPC off in the direction of the arrow.
(5) Squeeze the catches on the CASE LCD F in the
directions indicated by the arrows and remove.
(6) While squeezing the catches in the directions
indicated by the arrows, remove the case in the
direction of the arrow.
2-10
FinePix S9100/S9600 Service Manual
1
2
2
3
5
6
6
4
6
5