FujiFilm FINEPIX S9100 Service Manual page 124

4. Adjustments
<Step 1>
Select [F12] End Setting on the [Adjustment Items Select] screen.
—> The [End Setting Description] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
End Setting
The End settings consist of the destination setting,
the USB_ID write, and product mode settings
(= Mass Storage recognition).
Press the [Enter] key.
—> The [Destination Setting] screen appears.
<Step 3>
Destination setting
The destination is selected from an undermentioned list,
according to third character from left side of the serial number.
<A> FinePix S9100 J-model
<B> FinePix S9100 US-model
<C> FinePix S9600 EU/EG/EE/AS-model
<D> FinePix S9600 CH-model
<Note>
This example assumes that <B>US-Model has been selected. The following screen therefore appears.
—> The [US-Model selected] screen appears.
4-56
FinePix S9100/S9600 Service Manual
The third character
0 to 9
A to H,J,K
L to N,P to V
W to Z
<Fig. 4-20-1>
<Fig. 4-20-2>