2. Disassembly
2-11-10. Sticking the SHEET GRAPHITE to the HOLDER LENS/CCD plate
Purpose: To connect area A and CCD backing plate B with the SHEET GRAPHITE (to release heat from the CCD)
A
Stick the sheet in place as firmly as possible by pressing with your finger on A and CCD backing plate B.
A
2-26
A
B
A
B
FZ06466-100
FinePix S9100/S9600 Service Manual
Do not press on this area when applying the sheet (to prevent
FPC breakage).
Apply the SHEET GRAPHITE so that the indentation in the
sheet is aligned with the frame protrusions.
Ensure that the SHEET does not overlap the main capacitor
receptacle.
In this area, push the SHEET in so that it goes behind the
relay PWB.