FujiFilm FINEPIX S9100 Service Manual page 100

4. Adjustments
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
CCD Line defect adjustment
< CCD Line Defect Adjustment Preparations >
(1) Insert the xD card of 64MB or more
that has been formatted in the camera.
(2) Set FRAME No. to RENEW.
(3) Prepare the CCD data of this camera.
(4) Set the zoom position to the side of the WIDE edge.
When preparations (1)-(4) are complete,
press the [Enter] key on the PC.
--> The [Taking a picture complete] screen appears.
<Step 3>
Taking a picture complete
< CCD Line defect Adjustment Preparations >
(1) Turn off power switch.
(2) Pull out the xD card from the camera,
and insert it in the card reader etc.
(3) Copy DSCF0001.CM file that has been taken a picture
in to [ C:/FxS9100_9600_W/MS3931/ ].
(4) Turn on the power switch while pressing the shutter button.
(5) Press the [Enter] key after green LED lights on.
The system returns to the CCD data input screen
when press the [Enter] key.
--> The [CCD data input] screen appears.
4-32
FinePix S9100/S9600 Service Manual
<Fig. 4-12-1>
<Fig. 4-12-2>
Revised: 30, Jan. 2007