Inspection And Factory Settings - FujiFilm FinePix E500 Service Manual

5. Inspection
5-3.

Inspection and Factory Settings

Sequemnce Item
1 Check appearance
2 Power supply Auto
switch photography
LCD_ON
3 Check LCD Auto
photography
4 Check Movie Auto
mode shock noise photography
LCD_ON
5 Check macro Auto
photography photography
Check focus LCD_ON
6 Movie recording Movie
check photography
LCD_ON
7 Movie play back Playback
check
8 Resolution Playback
confirmation
9 BATT cover detect Playback
check LCD_ON
10 Delete mode Delete
check
68
Mode Preparations for adjustment
(measurement points, subject, other)
Visual check of camera
(1) Place ALKALINE
BATTERY in camera
(2) Insert xD-Picture card and
close cover
(3) Turn on the power SW
(4) If the date set message
appears, press Back
(1) Press DISP/BACK button
(2) Press DISP/BACK button
(3) Press DISP/BACK button
(4) Press DISP/BACK button
(1) Apply an appropriate
shock to the camera.
* Do not apply shock directly
to the lens or card cover.
(1) Press Macro button
(2) Match the Black-Edged of
MACRO CHART to a full
angle of view of LCD
(3) Press shutter button to
take photographs
(1) Select Movie mode
(2) Half-press shutter button
-> full-press -> full-press
-> half-press -> release
(3) Half-press five seconds
later -> release
(1) Select Playback mode
(2) Press 'Down' key to
playback movie
(1) Confirm the resolution of
the image recorded by "5"
(2) Connect the TV monitoring
(1) Open card cover to check
recording
(1) Select <Delete all frames>
from the menu, and press
the <OK> button
(2) Press the <OK> button
again
FinePix E500 Service Manual
Method of adjustment
(VRs, waveforms, required values)
No dents exterior of camera.
No problem with click action
of switches.
No dust or fogging of LCD
window.
(2) Recording check card
(3) Power supply LED is green
and beeps
(4) Through screen and text
display in LCD.
(1) Framing guide is displayed
(2) Framing guide disappears
(3) The LCD display
disappears
(4) LCD is displayed
(1) No problem with display on
LCD monitor.
Restoration possible
despite disruption of sync.
(1) Macro icon appears in
LCD monitor
(3) LED beside viewfinder
changes from green to
orange (recording) to
green
(1) Standby display on LCD
(2) Movie recording begins.
Recording displayed on
LCD.
(3) Movie recording
completed. Recording on
xD-Picture card
(2) Movie played back on LCD
monitor
(1) Played back on LCD
monitor.
(2) Standard (Horizontal
resolution)
NTSC Center area : 350
Circumferential area : 300
PAL Center area : 300
Circumferential area : 250
(3) Thing of four even points
(1) Switch power OFF
(1) [OK to delete all frames?]
displayed
(2) Movie/photography screen
extinguished
Measuring Measurement points
equipment and jigs (VRs, positions)
LCD monitor
LCD monitor
MACRO
CHART
LCD monitor
LCD monitor
TV monitor