FujiFilm FINEPIX S9100 Service Manual page 109

FinePix S9100/S9600 Service Manual
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
<Note>
Always use a 800mm conversion lens.
AF Adjustment
< AF Adjustment Preparations >
(1) Prepare a 800mm conversion lens.
(2) Prepare a S9100/S9600 Multi-stripe chart.
(3) Mount the camera on a zoom drive jig.
(4) Set FOCUS MODE to the position of [S-AF].
When preparations (1) - (4) are complete,
press the [Enter] key on the PC.
—> The [AF Adjustment (INF) Start] screen appears.
<Step 3>
AF Adjustment (INF)
(1) Set FOCUS MODE to the position of [S-AF].
(2) Set the zoom position to the side of the WIDE edge.
(3) Place the S9100/S9600 Multi-stripe chart at a distance of 897.3+-1mm from top of the [Filter Ring].
(4) Adjust the position of the camera so that the center of the
S9100/S9600 Multi-stripe chart is displayed in the camera LCD.
(5) Place the S9100/S9600 Multi-stripe chart at a
distance of 803.3+-1mm from plane side of the conversion lens.
When preparations (1) - (5) are complete, press the [Enter] key on the PC.
Top of Filter Ring
| <-------------------Center-----897.3+-1mm----------------------------------->
| Flat side
| |<----------------Center-----803.3+-1mm---------------------------->
|
Conversion lens (800mm)
CAMERA
DRIVE JIG
—> The [AF Adjustment (INF) Start] screen start.
—> Write the adjustment data to the flash ROM when adjustment has been completed correctly.
< Setup for AF Adjustment >
4. Adjustments
Multi-stripe chart
<Fig. 4-14-1>
<Fig. 4-14-2>
4-41