FujiFilm FINEPIX S9100 Service Manual page 28

2. Disassembly
[Notes on assembling the MAIN PWB ASSY/DCST PWB ASSY]
If the screw holes in the DC JACK and FRAME are
misaligned as shown in the figure below, the PWB is out of
position.
If this is the case, lifting the DCST PWB ASSY at point (1)
will produce a clicking noise.
If you hear a click, reposition the PWB correctly as shown
in the figure below.
2-14
FinePix S9100/S9600 Service Manual
Misalignment
Correct alignment
1