FujiFilm FINEPIX S9100 Service Manual page 90

4. Adjustments
<Step 10>
Prepare the AF sensor Linearity adjustment (900mm) according to the instruction of the adjustment software.
900mm conversion lens setup distance : 105mm+/-5mm from Zoom-Ring edge.
Chart surface reflective luminance : 7.0Ev to 9.0Ev.
Press the Enter key.
If an adjustment error is displayed, turn the camera off for some time and then perform the adjustment again.
AF-Sensor Linearity adjustment
(1) Set the 900mm conversion lens at a distance of 105+-5mm
from the Zoom-Ring edge.
(2) Set the zoom position to the side of the TELE edge.
When preparations (1) - (2) are complete,
press the [Enter] key.
105 +-5mm
|<->
| <--------------------------------------Center-------------------------------------->
---Conversion lens
|
CAMERA = = =
< Setup for AF-Sensor L Adjustment >
--> The [AF-Sensor right and left difference adjustment (Fig. 4-9-12)] appears.
<Step 11>
Adjust the AF sensor right and left difference again according to the instruction of the adjustment software.
AF-70cm chart setup distance : 700mm+/-5mm from front Zoom-Ring edge.
Chart surface reflective luminance : 7.0Ev to 9.0Ev.
Press the Enter key.
AF-Sensor right and left difference adjustment
(1) Change the S9000/S9500 AF-70cm Chart at a
distance of 700+-5mm from the Zoom-Ring edge.
(2) Don't set the conversion lens yet.
(3) Set the zoom position to the side of the TELE edge.
When preparations (1) - (3) are complete,
press the [Enter] key.
Zoom Ring edge
| <--------------------------------------Center-------------------------------------->
CAMERA < Setup for AF-Sensor R-L Adjustment >
--> Write the adjustment data to the flash ROM when adjustment has been completed correctly.
--> The [AF-Assist light adjustment complete Screen (Fig. 4-9-13)] appears.
4-22
1005+-5mm
700+-5mm
FinePix S9100/S9600 Service Manual
AF-1mH Chart
AF-70cm Chart
<Fig. 4-9-11>
<Fig. 4-9-12>