FinePix S9100/S9600 Service Manual
(13) Remove the 2 screws (M1.7 x 4.0).
(14) Pull the FLASH CONST off in the direction of the
arrow.
(15) Remove the 2 screws (M1.4 x 4.0).
(16) Pull the SW UNIT off in the direction of the arrow.
(17) Remove the solder on the red SYNCHRO TERMINAL
lead and loosen the lock nut.
(18) Remove the lock nut and base plate in the direction of
the arrow.
(19) Remove the SYNCHRO TERMINAL itself in the
direction of the arrow.
[Assembly]
Assemble by performing the disassembly procedure in
reverse order.
2. Disassembly
14
13
15
16
18
17
19
2-17