FujiFilm FINEPIX S9100 Service Manual page 89

FinePix S9100/S9600 Service Manual
<Step 9>
Prepare the AF sensor Linearity adjustment according to the instruction of the adjustment software.
AF-1mH chart setup distance : 1005mm+/-5mm from front Zoom-Ring edge.
Chart surface reflective luminance : 7.0Ev to 9.0Ev.
Press the Enter key.
AF-Sensor Linearity adjustment
(1) Change the S9000/S9500 AF-1mH Chart at a
distance of 1005+-5mm from the Zoom-Ring edge.
(2) Don't set the conversion lens yet.
(3) Set the zoom position to the side of the TELE edge.
When preparations (1) - (3) are complete,
press the [Enter] key.
Zoom Ring edge
| <--------------------------------------Center-------------------------------------->
CAMERA < Setup for AF-Sensor H Adjustment >
--> The [AF-Sensor Linearity adjustment (900mm) (Fig. 4-9-11)] appears.
AF-70cm <Step 8>, <Step 11>
1005+-5mm
4. Adjustments
AF-1mH Chart
AF-1mH <Step 9>, <Step 10>
<Fig. 4-9-10>
4-21