Sheet Emi-Frame; Sticking K Tape Onto The Lcd Fpc - FujiFilm FINEPIX S9100 Service Manual

2. Disassembly

2-11-7. Sticking K TAPE onto the LCD FPC

Purpose: To protect the LCD FPC
23mm
ZS00116-100
2-11-8. Sticking K TAPE onto the SHEET EMI-FRAME
Purpose: To ensure conductivity between the two metal plates
Overall view
2-24
Apply the K TAPE (19 x
23 mm) from a position
no more than 1 mm from
this protrusion.
BB17892-100
Pressure must NOT be applied to this section.
FinePix S9100/S9600 Service Manual
The entire tape is folded
back over on both sides.
Application position
Left-right: Left edge of the metal plate
Up-down: The corner where the plate
begins
Stick as much of the tape as possible
to the backing plate also (so that it
covers the screw heads).
The tape must not go any further left
than this line.