F7] : Flash Adjustment - FujiFilm FINEPIX S9100 Service Manual

FinePix S9100/S9600 Service Manual

4-15. [F7] : Flash Adjustment

<Setup for Flash Adjustment>
(1) As flash adjustment is readily affected by external light, ensure that the vicinity of the gray chart is very dark.
(2) Ensure that distance is measured from the front of the camera during flash adjustment.
(3) When adjusting the flash, always ensure that AF adjustment is complete before beginning flash adjustment.
<Step 1>
Select [F7] Flash Adjustment on the [Adjustment Items Select] screen.
--> The [Flash Adjustment Preparation] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
Flash Adjustment
< Preparations >
(1) Prepare a gray chart (1000mm x 1000mm or more).
(2) Mount the camera on a tripod.
(3) Press the flash pop-up button.
(4) Set the distance between the flash and
the gray chart to 1000mm+/-10mm.
(5) Set the zoom position to the side of the WIDE edge.
When preparations (1) - (5) are complete,
press the [Enter] key.
--> The [Flash Adjustment Start] screen appears.
1000±10mm
Centerline
Setup for Flash Adjustment
4. Adjustments
Gray chart
<Fig. 4-15-1>
4-43