FujiFilm FINEPIX S9100 Service Manual page 32

2. Disassembly
[Notes on assembly]
(1) Ensure that the GATE section of the BUTTON FLASH
is upwards when assembled.
(2) When assembling the SW UNIT, set the LEVER
FOCUS to "S" and assemble with the SW UNIT lever
set to the center position.
(3) Run the SYNCHRO TERMINAL harness facing
upwards as shown in the figure on the right. Secure
the base plate facing in the direction shown in the
figure on the right.
2-18
FinePix S9100/S9600 Service Manual
GATE
MF