4. Adjustments
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
Battery Voltage Adjustment
<Preparations>
1. Check that the Power Cable Jig and the camera are connected.
*If not, return to the Jig Mode Setup screen,
and connect the Power Cable Jig and the camera.
2. Supply power (5.0V) to the camera from the
[Power Cable Jig].
When preparations are complete, press the [Enter] key on the PC.
—> The [4.50V Input] screen appears.
<Step 3>
Battery Voltage Adjustment
(1) Supply 4.50V (+0.02V/-0.00V).
When preparations are complete, press the [Enter] key.
—> The [4.00V Input] screen appears.
4-46
FinePix S9100/S9600 Service Manual
<Fig. 4-16-1>
<Fig. 4-16-2>