Cub Cadet 6X4 Shop Handbook page 80

Caterpillar Enclosed CVT Addendum
CONVERSION INSTRUCTIONS: ENCLOSED CVT
1. PREPARATION
1a. Review and understand these instructions
before starting to work on the vehicle.
1b. Collect all necessary tools.
1c. Lay-out the contents of the CVT enclosure
kit. Make sure all the parts are present
and identified. See Figure 2b.1.
New back plate
CVT cover
Seat
bracket
Figure 2b.1
Description
Mounting stud: driven pulley
and fan
Washer
Castle nut, 1/2"-20
Washer, fan
Cotter pin, 3/32" x 1"
Back plate-eng. screw
Back plate-trans screw
Cover screw
Bracket mount screw
CVT Spacer washers
Intake tube
Tube
bracket
Fan
Seat plate
Qty.
1
1
1
1
1
5
4
12
2
3
2. ACCESS
2a. Lift the load box (bed).
2b. Slide the driver's seat all the way back on
its tracks.
2c. Tilt the seats forward. Secure the driver's
seat in the tilted position using a shock
cord.
2d. Release the Camlok fasteners that secure
the parcel bin under the passenger seat,
and remove the parcel bin.
2e. Release the camlok fasteners that secure
the engine cover, and remove the cover.
2f. Unbolt the passenger's seat mounting
bracket from the seat plate using a pair of
1/2" wrenches. Remove the seat and
bracket. See Figure 2b.2.
NOTE: It is not necessary to disconnect any fuel
lines. The fuel pump and filter will be moved to
provide room for the CVT cover to fit into the
area below the seat box.
76
Seat plate
Seat mounting bracket
Figure 2b.2