Cub Cadet 6X4 Shop Handbook page 65

Item
1
Reverse idler bolt
Neutral safety
2
switches
Detent plate screw
Case screws
Adaptor housing
3
screws
Drain and level plugs
Fill plug and vent
3
Shift arm bracket
Shift arm pivot bolt
Shift arm / shift pin
3
shoulder screws
Brake caliper bracket
1
screws
1
Brake caliper bolts
1
Apply a small amount of permanent thread locking
compound such as Loctite® 262 (red) to the screws
that hold the caliper bracket to the case.
2
Apply a small amount of thread sealant. PTFE-
based tape or liquid products are suitable.
3
Apply a small amount of "Service Removable" or
"Medium Strength" threadlocking compound such as
Loctite® 242 (blue) to the screws that hold the caliper
bracket to the case.
Chapter 2- Drive System: CVT and Transfer Case
ft-lbs N-m
32-40 43-54
32-36 43-49
16-21 23
16-21 23
16-21 23
18-23 25-32
snug snug
16-21 23
9 13
9 13
16-21 23
16-21 23
61