Table of Contents
Advertisement
Getting Started
Removing and replacing the server panels
To remove the front panel:
1
Release the door lock and open the upper and lower doors as a single unit.
2
Lift the lower panel to unhook its hinges and remove it from the server.
Removing the front panel
To install optional devices inside the server, you need to remove the side panel if your
server is a pedestal model, or the top panel, if your server is a rack model.
Removing the side panel (pedestal model)
When sliding off a server panel, be careful not to catch your finger between it and
the server.
To remove the side panel:
1
Shut down the server, turn off the power, and unplug the power cable.
2
Turn the side panel lock counter-clockwise to release it.
Releasing the side panel lock
Removing and replacing the server panels
30
Advertisement
Table of Contents
