Table of Contents
Advertisement
Connecting Hardware Devices
Installing the CPU Module
A standard CPU module is installed in CPU socket 1. To add a CPU module,
install it in CPU socket 2.
Installing a 2.40 GHz CPU Module
1
Flip the heat sink lock levers on the left and right of the CPU socket down in the
direction of the arrows, and remove from the claw to lift up.
Flipping the heat sync lock levers
2
Raise the CPU lock lever of the expansion CPU socket.
Raising the CPU lock lever
Before you install a CPU into a CPU socket, make sure that the lever of the
CPU socket is fully opened (about 135 degrees).
If you insert the CPU without opening the lever of the CPU socket completely,
it will not only cause the recognition failure of the CPU, but also damage the
CPU or CPU socket, or generate short circuit inside the CPU socket, which
may require repair.
76
CPU module
Advertisement
Table of Contents
