Running Test (02. Running Test) - Toshiba Magnia 3310 User Manual

Hardware Diagnostics

Running Test (02. RUNNING TEST)

1 Using the arrow keys, highlight 02. RUNNING TEST on the HW Diagnostics
Program Main Menu.
2 Press Enter.
When a test is selected, the TEST PARAMETER Screen appears:
[ TEST PARAMETER ]
01. Go to Test
02. Test ITEM EDIT
03. Finish BUZZER Sound
04. Exit to DIAGNOSTIC MENU
TEST PARAMETER Screen for 02. RUNNING TEST
Select one of the following, using the arrow keys:
❖
01. Go to Test
Select this option to start the RUNNING TEST.
When the test is completed, the test result appears on the screen in large text.
No error has been detected.
The test has been compulsorily ended or any error has been
detected.
To check the error log, select 03.LOG UTILITIES on the HW Diagnostics Program
Main Menu. For the key operation on the error log display, refer to "Checking error
log" in this chapter. If the test in progress has been stopped, the test result is not
displayed.
If you need to stop the test program, press <Ctrl> + <Break>.
❖
02. Test ITEM EDIT
Select this option to see the items currently in the RUNNING TEST and to add or delete
individual tests. See description below.
❖
03. Finish BUZZER Sound
Select this option so that when the Server finishes the running test, the beep sounds.
❖
99. Exit to DIAGNOSTIC MENU
: OFF
HW Diagnostics Program Main Menu
OK
FAILED
258