Table of Contents
Advertisement
Server Setup Tool
1
Check that the HDD(s) are operating correctly, by using HW Diagnostics Program.
2
Check that the SCSI cable is connected correctly.
Hard disks not found.
Point: During the HDD access.
Reason: Response was not returned from the HDD.
Action:
1
Check that the HDD(s) are operating correctly, by using HW Diagnostics Program.
2
Check that the HDD(s) are connected correctly.
3
Check that the SCSI cable is connected correctly.
Error occurring during OS installation
The "winnt" command terminated abnormally.
Point: During the Windows 2000 installation.
Reason: Windows 2000 was not installed correctly.
Action:
1
Perform the Windows 2000 installation from the beginning again.
2
When you are not still able to install correctly, perform the Windows 2000 installation
manually.
164
Troubleshooting
Advertisement
Table of Contents
