Toshiba Magnia 3310 User Manual page 81

Connecting Hardware Devices
Attaching the heat sink
Do not push the fin section of heat sink of the CPU module. This may cause
the deformation of the heat sink.
Used heat sinks cannot be reattached. To replace a heat sink, contact your
Toshiba service station or sales representative. (Services will be provided for
a fee.)
6 Latch both ends of the claws of the heat sink on one side of the retention holes. At
this time, while lightly pressing the claws toward the inside of the retention clamp,
insert the heat sink until the claws are completely secured.
Attaching the heat sink
7 While gently pressing the heat sink of the expansion CPU against the CPU socket,
simultaneously move both the left and right heat sink lock levers right in the direction
of the arrows, and hook the levers onto the claws to lock the heat sink in place.
Do not pinch your fingers during the procedure.
81
CPU module