Table of Contents
Advertisement
Server Setup Tool
Onboard 1Gbps LAN Adapter (Ether1)
Can be used with the 1000Base-T/100Base-TX-TX/10Base-T ethernet LAN. This is
the default selection.
Onboard 100Mbps LAN Adapter (Ether2)
Can be used with the T/100Base-TX/10Base ethernet LAN.
The LAN driver for the onboard LAN adapter (Ether 2) must be installed,
regardless of the setting made on this screen. If the Onboard 100Mbps LAN
Adapter option is not selected, the onboard LAN adapter (Ether 2) will be setup
using the default Windows Server 2003 setting.
Network Protocol Setting-1
After specifying the LAN adapter, the Network Protocol Setting-1 screen appears. This
screen allows you to specify the network communication protocol for on-board LAN
controller (1Gbps LAN adapter).
Network Protocol Setting-1 screen
TCP/IP Protocol
Transport Control Protocol/Internet Protocol. If you select this option, the SNMP
service will automatically be installed.
NetBEUI Protocol
NetBIOS user interface.
❖
Select the communication protocol being used, and then click Next.
143
Starting SST
Advertisement
Table of Contents
