Hardware Diagnostics
Check that all LEDs for the hard disk drives are flashing orange. Then press Enter.
The following message appears:
SAF-TE LED Steady ON (Rebuild Interrupted) Press any key
Check that all LEDs for the hard disk drives are lit orange. Then press Enter.
The following message appears:
SAF-TE LED Blinking (Rebuilding Flag)
Check that all LEDs of the hard disk drives are flashing orange. Then press Enter.
The following message appears:
SAF-TE LED Reset (No Error Flag)
Check that all LEDs of the hard disk drives are off. Then press Enter.
❖
12. BMC TEST checks BMC functions and sensors.
- 01. Sensor TEST checks the baseboard sensors for:
- 02. Front panel test checks that the LEDs are working properly.
FAN and POWER SUPPLY Fault
LEDs are ORANGE
FAN and POWER SUPPLY LEDs
are OFF
CPU temperature
System temperature
Voltage
Fans
Redundant fans
Power supply fans
Power supply(ies)
LED Check
HW Diagnostics Program Main Menu
Press any key
Press any key
OK (Y) / FAILED (N)
OK (Y) / FAILED (N)
Meaning
269