Removing And Replacing The Server Panels - Toshiba Magnia Z300 User Manual

54
Installing and Removing Hardware

Removing and replacing the server panels

Removing and replacing the server panels

To mount optional devices inside the server, you need to remove
the top panel depending on the option you are mounting.
CAUTION: When sliding a server panel, be careful not to
catch you finger between it and the server. The panel might
cause injury.
Removing the top panel (for Micro Tower Types)
Follow these steps to remove a top panel:
1 Shut down the server and switch off the power if it is in opera-
tion.
2 Unplug the power cable.
3 Remove four screws on the upper outer cover. In addition,
remove the four screws on the bottom outer cover.
Removing the outer cover (upper)