Table of Contents
Advertisement
Connecting Hardware Devices
2
Turn the screws for securing the exhaust fan duct counterclockwise to release the
module.
When a 3.06 GHz CPU is installed, the exhaust fan duct is not attached and Steps
2 and 3 are not required.
Releasing the lock of exhaust fan duct (fan duct not installed on all models)
3
Slide the exhaust fan duct toward the rear of the server, and pull it from the server.
Removing the exhaust fan duct (fan duct not installed on all models)
4
Remove any expansion cards that might be installed. See
cards
on page 100 for more information.
When removing expansion cards, make a note of which slot they came from so
you can return them to their original slots.
Memory modules
Removing expansion
62
Advertisement
Table of Contents
