Table of Contents
Advertisement
Server Setup Tool
7
Click Browse on the "Install From Disk" dialog box. Use the "Locate File" dialog box
to navigate to <CD-ROM>\Public\Video\Ati\RageXL\w2k\ATIDrive.
8
Select the file named "ATII2KAD.INF" and click Open.
9
Click OK on the "Install From Disk" dialog box.
Windows 2000 Manual Installation using SST
When Install Windows 2000 - Manual Installation is selected from the Operating
System Installation Selection menu, the RAID system is automatically configured, and
the diskettes for manual installation are automatically created.
Manually Installing Windows 2000 Server
You can install Windows 2000 Server from the Windows 2000 Server CD-ROM, or using
the WINNT command to install on a disk already partitioned with MS-DOS.
Installing Windows 2000 Server Service Pack
After installing Windows 2000 Server, you will need to install the latest Service Pack for
Windows 2000. Refer to the Service Pack documentation for details.
Updating the LAN driver
After installing the Windows 2000 Server Service Pack, you need to update the LAN
driver. The following procedure shows you how to update the LAN driver.
1
Insert the Magnia 3310/3310R Server Setup Tool (SST) CD-ROM in the CD-ROM
drive.
2
Right click "My Computer" and select "Properties."
3
Select the Hardware tab in the My Computer Properties window.
4
Click Device Manager. Expand the Network adapters category.
5
Right click your Network Interface Card and select "Properties."
6
When the Properties window for the Network Interface Card opens, select the Driver
tab.
7
Click Update Driver.
8
Click Next when the "Upgrade Device Driver Wizard" window appears.
9
When asked "What do you want the wizard to do?" select the radio button "Display a
list of the known drivers for this device to that I can choose a specific driver." Then
click Next.
10
Select "Have Disk" for the "Select Network Adapter" screen.
156
Starting SST
Advertisement
Table of Contents
