Table of Contents
Advertisement
Connecting Hardware Devices
10
Attach the cable from the exhaust fan unit that you attached to the motherboard.
Connect the standard exhaust fan module to J49 FAN 1 on the motherboard.
If installed, connect the redundant exhaust fan module to J51 FAN 1-R on the
motherboard.
Attaching the exhaust fan cables
11
If expansion cards have been removed, install them according to the procedure. See
Installing expansion cards
12
Insert the exhaust fan duct and attach it in the server by sliding it toward the front of
the server.
When a 3.06 GHz CPU is installed, Steps 12 and 13 (installing the exhaust fan
duct) are not required.
Attaching the exhaust fan duct (fan duct not installed on all models)
on page 98 for more information
65
Memory modules
Advertisement
Table of Contents
