Table of Contents
Advertisement
Connecting Hardware Devices
Replacing a hard disk drive
1
Open the server's upper and lower front doors.
2
Locate the faulty hard disk drive.
The status indicator of the faulty drive will be amber.
3
Open the latch of the drive bay in which you are replacing the faulty hard disk drive.
The hard disk drive partially extends from the drive bay.
Opening the drive bay latch
4
Wait five to ten seconds for the disk to spin down, then using both hands, remove the
HDD/drive tray assembly from the drive bay.
Hard disk drives generate heat when in use. To avoid burn injuries, use the disk
tray when handling the hard disk drive.
Removing the hard disk drive tray
5
Place the new HDD/drive tray assembly in the drive bay, then slide it to the rear of
the drive cage.
Disk tray
Installing a hard disk drive
96
Advertisement
Table of Contents
