Hardware Diagnostics
To save test items:
1
Press Enter to exit the test items selection menu.
The message "Do you save data?" appears.
2
Select one of the following:
❖
YES to save the settings.
❖
NO to not save the settings.
The edited test items are saved in the system RAM memory. When you close the
HW Diagnostics Program and restart the system, the test items are returned to the
initial settings.
Test Execution
The IN PROGRESS screen displays when executing tests on the DIAGNOSTIC TEST
menu and the RUNNING TEST menu.
The following items are displayed on the IN PROGRESS screen:
❖
XXXX TEST displays the name of the test being executed.
❖
SUB TEST indicates the subtest number and the step number of the test being
executed.
❖
PASS COUNT shows the pass count of the test.
❖
WRITE DATA indicates the write-data.
❖
READ DATA indicates the read-data.
❖
ADDRESS displays the address of the test being executed.
HW Diagnostics Program Main Menu
260