Table of Contents
Advertisement
Server Setup Tool
TCP/IP Protocol Setting-1
If you have specified TCP/IP as the network communication protocol on the Network
Protocol Setting-1 screen, the TCP/IP Protocol Setting-1 screen appears. The TCP/IP
Protocol Setting-1 screen allows you to specify an IP Address, Subnet Mask and Default
Gateway Address for the on-board LAN Controller (1Gbps LAN controller).
TCP/IP Protocol Setting-1 screen
1
Enter an IP Address.
2
Enter a Subnet Mask.
3
Enter the Default Gateway Address.
To have the DHCP server automatically assign the IP addresses, Subnet Masks and
Default Gateway to your computer, select Assign an IP Address from DHCP
Server.
4
After making your entries, click Next.
144
Starting SST
Advertisement
Table of Contents
