Hardware Diagnostics
STS shows the error status. The meaning of the error status depends on the test item.
ADDR shows the address where the error occurred
WD shows the write-data at the occurrence of the error.
RD shows the read-data at the occurrence of the error.
ERROR NAME / DETAILS shows the error name and its detail information.
Key Operations for Log Utilities
To scroll the error log screen or to save and to clear the error log information, use the
following keys:
Key
Down Arrow
Up Arrow
Esc
1
2
3
4
When the error log information is cleared using the 1 key, any error information
recorded on the diskette is also cleared. Also, if you exit the program or turn off the
server, the error information is lost.
System Configuration Display
04.SYSTEM CONIGURATION screen displays configuration information. The screen is
divided into three tabs: SYSTEM CONFIG, SCSI DEVICES and BMC INFO.
Scrolls to the next page
Scrolls to the previous page
Finishes the error log screen and returns to the Main
Menu
Clears the error log information
Prints out the error log information
Reads the error log information saved on the floppy disk
Saves the error information on the floppy disk
HW Diagnostics Program Main Menu
Function
271