Module Roles - Toshiba Magnia 3310 User Manual

Management Software
Trap transmitting to a Compaq Insight Manager
If a server error occurs, it is possible to transmit a SNMP trap. A SNMP trap is
transmitted when a temperature, FAN, or voltage error occurs. To take advantage of this
function, the SNMP trap must be activated using HEWCONF. This utility is located in
\\Program files\HEW\Agent.
Auto-shutdown
Automatically shuts down the server. This feature is not available on a Magnia 3310/
3310R.
Log collection
Collects error log information on the Agent machine.
Associated enterprise
If a server error occurs, it is possible to transmit a message.
Remote Console
Allows a remote console to access the agent machine. This feature is not available on a
Magnia 3310/3310R.
HDD Connector Log
Collects hard disk log information. This feature is not available on a Magnia 3310/3310R.

Module Roles

Agent
The HEW Agent monitors the server on which it is installed. System faults are sent to the
Management Proxy. The Agent is responsible for responding to requests for information
generated by the Management Proxy. Install the HEW Agent on each Magnia 3310 that
you wish to monitor.
Management Proxy
The Management Proxy collects error reports from the Agent, stores them, and in turn
relays settings from the Management Console to the Agent. Collected error information
can be sent by e-mail or displayed as Alert Messages on the Management Console
machine.
At least one Management Proxy machine is required per system. Two Management
Proxy machines can be setup so that one works as the primary server and the other as
the backup server for management of Agent information.
When two Management Proxies are used, the servers must be set up to prevent alarm
reports sent to Management Console from being duplicated. The primary Management
Proxy should be set up to send e-mail and Alert Messages to the Management Console,
and the backup Management Proxy should be set up not to send them to the
Management Console.
169
HEW modules