Toshiba Magnia 3310 User Manual page 268

Hardware Diagnostics
DD
EE
FF
GG
The CD-ROM test tests only one IDE CD-ROM. The CD_ROM test searches for
the CD-ROM device in the following order: IDE (PrM, PrS, ScM, ScS), SCSI (ID0,
ID1...). The CD-ROM device encountered first is the device tested.
❖
11. SAF-TE TEST checks the SAF-TE function and the status LED of the hard disk
drives.
SAF-TE TEST (SAF) Error Log
Status
01
- 01. SAF-TE test detects the SAF-TE controller and checks the operation by flashing
the LED for each hard disk drive.
The test detects the SAF-TE controller first and shows the connecting destination of
the detected SAF-TE controller (host number, SCSI ID, and channel number) with
model name. For example:
--HT-ID----CH--VENDOR-PRODUCT-------FAN--PS--SLOT
XX XX XX XXXXX
After detecting the SAF-TE controller, the following message appears:
SAF-TE LED Steady ON (Faulty Flag)
Check that all LEDs of the hard disk drives are lit orange. Then press Enter.
The following message appears:
SAF-TE LED Blinking (Rebuilding Flag)
Sense data (2 byte)
Sense data (12 byte)
Sense data (13 byte)
Sense data (14 byte)
Error name
SAF-TE TEST ERROR
XXXX XX XX XX
HW Diagnostics Program Main Menu
Sense Key
Expansion Sense code
Expansion Sense code
Meaning
SAF-TE controller has not been
detected
Press any key
Press any key
268