Setting-Up Opc Server; Installation - Toshiba TC-net Instruction Manual

2. Setting-Up OPC Server

This chapter describes installation, maintenance and uninstall of OPC Server.
Important:
TC-net OPC Server needs "TC-net PCI Bus Support Software".
Before installing TC-net OPC Server, pelease install "TC-net PCI Bus Support Software".
Important:
"Microsoft.Net Framework version 2.0" are necessary for execution environment of a Log Save Tool.
Install it according to "9.2.1 Installing Microsoft.Net Framework 2.0".

2.1. Installation

There are the following three types of installation.
(1) Both
Install OPC Server and environments to develop OPC Client.
(2) Client
Install environments to develop OPC Client only.
(3) Server
Install OPC Server only.
These types are selected at the time of installing.
When you install to PC for OPC Server, you must select "Both" or "Server".
When you install to PC for only OPC Client, you must select "Client".
Install OPC Server from CD.
Proceed as shown below.
<1>Launch "Setup.exe" under in CD.
Input Serial numbers and click <Run>.
2. Setting-Up OPC Server
7